BMW E-sys launcher pro guide on how to program and code with BMW E-sys (To connect to BMW E-sys launcher pro you can use BMW ICOM NEXT or ENET wifi)
- Connect to BMW car;

2. E-sys Read FA, read ECU and Calculate ECU version. (Calculate will take 10 minutes)

3.Select SVT (calculated);

4. Select the ECU to be programmed, check the program file, and click Start to program;(will take 10 minutes or more)

5. Program finished;

6. After programming ECU, you still need to ECU code;

7. Code finished, ECU programming complete. (Tips: If the ECU still does not work, you need to use the BMW ISTA diagnostic software to check the fault and check whether the ECU needs to be matched or learned.)

