XENTRY Diagnosis Kit 4

XENTRY Diagnosis Kit 4 consists, as usual, of two components: XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI. The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3.

Easier to use

  • The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.
  • XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port
  • Located on the front side are two buttons that you can configure individually using ConfigAssist
  • To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.

Much faster

  • XENTRY Diagnosis Pad 2 comes with the latest Intel庐 CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)
  • The main memory has 16 GB DDR4
  • 1 TB SSD hard drive (with 3000 MB/s read and write speed)

More convenient

  • The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.
  • XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.
  • XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.

HelpCard XENTRY Diagnosis Kit 4
XENTRY Diagnosis Kit 4

XENTRY Diagnosis Pad 2 technical data

Feature 
Operating systemWindows 10 IoT LTSC Enterprise
ProcessorIntel庐 CoreTM i5
Main memory16 GB DDR4
Hard drive1 TB SSD
Display13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare
DimensionWait approx. 338 x 240 x 33 mm (W x L x H)
Weight2.3 kg

XENTRY Diagnosis VCIThe VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4.Product advantages

  • The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
  • No more diagnosis updates required 鈥?only firmware updates on rare occasions
  • Can be used for all model series
  • Does not require an adapter for an external power supply

XENTRY Diagnosis VCI technical data
XENTRY Diagnosis Kit 4 3

XENTRY Diagnosis VCI technical data

Feature 
Network connection 
CabledUSB 2.0
WiFi stick802.11b/g/n
Processor system 
MicroprocessorIntel MX6 Solo
RAMRAM : 512 MB DDR3 RAM
ROM512 MB flash
User interface 
LEDs5 status LEDs
Power supply* 
From the vehicle battery via the diagnosis connection cable
or via a connected USB cable.
8 V to 28 V
Certifications 
VCIFCC, CE, RoHS

*Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.

Leave a Reply